The mechanics of a siphon are quite amazing.
It requires some initial force, and with the right conditions, continuous pressure can be harnessed to transfer a liquid from one location to another.
In Aquaponics, it is imperative that correct and continuous water flow is maintained in order for the plants and fish to obtain adequate amounts of nutrients.
The Bell Siphon is the device responsible for regulating water flow throughout the entire system.
It is important to understand how the Bell Siphon functions and how to ensure it stays functioning.
In this article, we'll cover:
- The importance of a bell siphon for aquaponics systems
- The components of a bell siphon and how to install one
- Troubleshooting common problems with bell siphons
- Where can I purchase a good-quality bell siphon for my aquaponics system?
Well-constructed PVC Bell Siphon
- Made in USA
- Well-reviewed by Aquaponics Farmers
Smoky Mountain Aquaponics manufactures bell siphons for 4.5", 6", 8", 10", and 12" media beds. Trusted by aquaponics professionals and enthusiasts alike, these bells siphons are a reliable choice for you system.
- What is a Bell Siphon?
- How is a Bell Siphon Beneficial for an Aquaponics System?
- Bell Siphon Components
- Set Up and Installation
- What are the Best Bell Siphon Kits I Can Buy?
What is a Bell Siphon?
A Bell Siphon is a simple device used to regulate the flow of water in aquaponic and hydroponic systems easily and efficiently, with no need for human intervention. The siphon first allows the grow bed to flood, then it automatically drains out the water when it reaches a certain level. The siphon also maintains a minimum water level as the excess water is drained.
Bell siphons avoid the need to manually turn the pump on and off during the flood and drain cycle. The flood and drain cycle is implemented to boost oxygenation and help the plants to absorb more nutrient. Thus, the cycle plays a crucial role in ensuring healthy growth and development of the plants.
How Does a Bell Siphon Work?
Bell siphons implement a very simple mechanism which leverages the forces of pressure and gravity.
- The drained grow bed is first filled with water using a water pump.
- When the water level reaches the top of the stand pipe situated inside the siphon pipe, water will start flowing through the reducer placed at the top of the stand pipe and out through the stand pipe into the fish tank at a low pressure.
- As water slowly drains out of the stand pipe, water builds up inside the bell and pushes air out through the stand pipe. As a result, the pressure inside the bell eventually falls.
- The resulting low pressure in the bell leads to a pressure difference between the bell and the atmosphere which forces the siphon to fire. Thus, the siphon rapidly pushes out and dumps the water through the stand pipe at a much higher pressure until the water level reaches the base of the grow bed.
- As the water level approaches the base of the siphon pipe, air enters the bell through the slits at the bottom of the siphon pipe which relieves the pressure difference between the bell and the atmosphere, causing the siphon to break and halt the drain of water.
As the pump continues to run, water will keep pouring into the grow bed. Once the water level reaches the top of the stand pipe, the siphon is triggered again. This flood and drain cycles repeats indefinitely until the pump is stopped.
Koi Fish for Aquaponics: What You Need to KnowFebruary 10, 2020
Aquaponics pH Explained: Finding the Perfect BalanceNovember 7, 2018
How is a Bell Siphon Beneficial for an Aquaponics System?
In aquaponic systems, bell siphons allow water from the grow bed to be automatically drained into the fish tank and the pump to take water from the fish tank into the grow bed. In addition to the automatic regulation of water which greatly saves the time and effort of aquaponic farmers, bell siphons have several other benefits when used with aquaponic systems.
More Aeration for the Plants’ Roots
Using a bell siphon improves the oxygenation to the roots of the hydronic plants. As the bell siphon drains out water regularly, the full lengths of the roots are exposed to air regularly. This promotes oxygen intake, thus aiding in plant growth and the overall health of the plants. The indefinite flood and drain cycle allows the plants to remain hydrated and take in nutrients as well as oxygen for a balanced intake of required elements.
Constant and Consistent Movement of Water
Bell siphons allow for the constant and consistent movement of water out of and into the grow bed. This regular in and out flow of water improves the oxygen level of the water and prevents water stagnation which could attract bacteria, mold, mosquitoes and rodents. The water flow improves supports for the healthy growth of the plants.
The Process is Automatic
Bell siphons work automatically with the support of Physics concepts. This makes the process very efficient for the farmers. You would not need to manually drain the grow bed which saves tremendous amount of time. There is no need for a timer and other additional drainage equipment, which also helps save costs.
Ensures Maximum Efficiency
Bell siphons enable your aquaponic system to function at maximum efficiency as the process takes place automatically. After trial and error, once you establish the optimum water pump flow rate, the bell siphon maintains a consistent flood and drain cycle with regular intervals.
Simple and Reliable
Bell siphons are relatively easy to maintain. All you need to do is a little routine cleaning once in a while and some troubleshooting after installing. Bell siphons are also very easy to set up and they require no electricity
Bell Siphon Components
A bell siphon consists of 7 main components
The bell cap pays a crucial role. As water overflows into the stand pipe, low pressure eventually builds under the bell cap which ends up forcing out water at a higher rate until air enters the bell when the water level reaches the slits at the base of the siphon pipe.
The reducer is placed at the top of the stand pipe which helps to create the siphon in the discharge pipe with a smooth transition. A reducer with a 2:1 ratio has proved to be the optimum – if the stand pipe is 1 inch in diameter, a reducer with a diameter of 2 inches at the top and 1 inch at the bottom will be most suitable.
The siphon pipe creates a barrier between the siphon and the atmosphere, preventing air from entering inside. It allows the siphon to build up a negative pressure which then creates a vacuum that keeps water flowing in the siphon. The siphon pipe usually has slits at the bottom to allow air into the system, once the grow bed drains, to stop the siphon with the rise of pressure.
A good rule of thumb – the siphon pipe should have a diameter twice as big as the reducer.
The stand pipe is placed inside the siphon pipe to and acts as the discharge pipe, regulating the maximum water level in the grow bed. It connects the bulkhead to the reducer. The water flows out through the stand pipe once the it reaches the top of the stand pipe.
The media guard acts to keep rocks and other … off the siphon pipe while allowing water to easily flow in and through the stand pipe. The guard prevents the support medium used in the grow bed from clogging the stand pipe and bell siphon.
The bulkhead allows water to drain through the stand pipe without leaking back into the siphon. It also holds the stand pipe in the grow bed.
The outlet pipe, or drain pipe, extends from the bottom of the bulkhead into the fish tank.
Video: Bell Siphon Animation
Watch this short animation explaining how a bell siphon works.
Set Up and Installation
Follow the below steps to install your bell siphon.
Step 1 – Prepare the Ground with Your Tiles
Stack the tiles to your preferred height then place the table, on which you are hoping to keep the grow bed, on top of the tiles. Make sure that the table and tiles are leveled out to ensure that your table is stable. Also remember to leave enough space for your fish tank if you are hoping to place the tank underneath the table.
Step 2 – Place your Grow Bed
Place your grow bed on of the table and check to make sure that it the bed leveled and stable.
Step 3 – Set up your Bell Siphon
- Put the uniseal in the hole at the bottom of the grow bed then place the stand pipe
- Push the stand pipe through the top of the uniseal until the top of the stand pipe is at the height of the bottom on the bell cap on the bell siphon.
- Connect the rest of the drain leading to the fish tank by fixing the 90-degree elbow onto the bottom part of the stand pipe sticking out below the grow bed
- Position your gravel guard around the stand pipe with the pipe at the center then weigh down the guard with a bag of cinder
Step 4 – Fill Up your Grow Bed
Using cinders, fill up the rest of your grow bed to the height of the top part of the stand pipe. To check if the cinders are high enough, you can fill the grow bed with water to the top of the stand pipe using a hose. This will expose low spots in the form of puddles. If there are any puddles, you can add cinders to level out the low spots. The goal is to make sure that you are unable to see the water level when it is at the top of the stand pipe – the cinders should prevent you from seeing the water level.
Step 5 – Rinse your Cinders
When you handle the cinders, there will be some black particulate. To rinse them, place the bell siphon over the stand pipe then continuously shoot the cinders placed in the grow bed from the top with a water hose. Let the water to drain out via the bell siphon. You can stop shooting the water once you feel that the cinders are clean.
Make sure that the rinse water is not draining into the fish tank!
Step 6 – Complete the set up
- Place the fish tank underneath the grow bed and fill up the tank with water once you have ensured that the grow bed has completely siphoned all the rinse water.
- Place the pump and piping in the fish tank and zip tie the piping to the lip of the grow bed for stability
- Turn on the pump and make sure that the siphon is working properly
- Add your fish and vegetables. You may add the organic digester to the fish tank before adding the fish.
- Ensure that the stand pipe is not too tilted as it can slow down the drain system
- Set up the bell siphon unit at the center of the grow bed, the best place possible
Here is a brief outline of how to deal with the two most common issues faced with bell siphons.
The bell siphon will not trigger – the water level in the grow bed stays high and may overflow, but the water doesn’t flush
- Check the seal connecting the cap to the siphon pipe. The seal needs to be airtight, if not the vacuum needed to initiate the siphon action will not form
- Make sure that the bell siphon and gravel guard are firmly placed at the bottom of the grow bed. If not firmly in place, pieces of cider may move under the siphon pipe which will create an extra space between the bell and stand pipe. This additional space can prevent the siphon from triggering.
- Increase the flow of water entering the grow bed to trigger the bell siphon
- Increase the resistance of the drain pipe where water returns to the fish tank by turning the 90-degree elbow up so that the water can build up then dump
The bell siphon dumped the water, but the grow bed is not filling up again – the water in the grow bed remains at a low level and keeps flowing out of the drain pipe.
- Adjust the incoming flow rate by decreasing the flow of water entering the grow bed to allow the bell siphon to suck up air to break the seal. The siphon will find it difficult to drain the grow bed if the rate of water flow is too great,
- Adjust the drain by decreasing the resistance of the drain pipe by turning the 90-degree elbow down to let the water to drain faster and allow the siphon to take in air. A slightly longer or shorter vertical or horizontal drainpipe may also fix the problem.
Remember to make sure that the drain pipe is not too long as it will create more resistance which will in turn affect the siphon.
What are the Best Bell Siphon Kits I Can Buy?
Smoky Mountain Aquaponics manufactures an excellent bell siphon constructed from various sizes of PVC pipe. Accommodating media sizes of 4.5", 6", 8", 10" and 12", these Bell Siphons are well-constructed and highly reviewed by Aquaponics farmers around the world. Having sold over 7000 siphons worldwide, Smoky Mountain Aquaponics is quickly becoming a trusted brand in Bell Siphon manufacturing. All gravel shields are slotted for maximum drain and maximum filtering. No-clog bell comes with cap and pull handle and is easy to assemble and install.
- Media size: 4.5"
- 2" x 5" Slotted PVC Gravel Shield
- 1.25" x 4" PVC Bell
- Media size: 6"
- 2" x 7" Slotted PVC Gravel Shield
- 1.25" x 6.5" PVC Bell
- Media size: 8"
- 3" x 9" Slotted PVC Gravel Shield
- 2" x 6.5" PVC Bell
- Media size: 10"
- 4" x 12" Slotted PVC Gravel Shield
- 3" x 10" PVC Bell
If the water pump is considered the heart of an aquaponics system, pumping nutrient-rich water to all the necessary parts, the bell siphon might be considered the lung. It uses air pressure to regulate a steady rise and fall in the water level. A well-constructed bell siphon will keep an entire system flowing properly, simply by physics.
Thank you for taking the time to read our article on the bell siphon for aquaponics. We'd love to hear your feedback in the comments section below. If you've found this article to be useful and are interested in learning more, be sure to sign up for our newsletter.
worldwaterreserve.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Some links may be affiliate links.
Share this post!
Affnan's Aquaponics. (2010, February 8). Affnan's Valve - A Detailed Explanations of A Simple Item. Retrieved from http://www.affnanaquaponics.com/2010/02/affnans-valve-detailed-explanations-of_9459.html
Aquaponics Exposed. (2016, December 29). Bell Siphon For Aquaponics - Aquaponics Exposed. Retrieved from https://aquaponicsexposed.com/bell-siphon-for-aquaponics/
The Aquaponics Place. (n.d.). Aquaponic System Installation/Bell Siphon Troubleshoot. Retrieved from http://www.theaquaponicsplace.com/aquaponicsystemsetup/bellsiphontroubleshoot/
The Aquaponics Source. (n.d.). Aquaponics Bell Siphon. Retrieved from https://www.theaquaponicsource.com/shop/build-your-system/aquaparts-plumbing-kits/aquaparts-bell-siphon-and-media-guard/
Ati Reliant. (2013, February). Bell Siphon | AntiReliant.com. Retrieved from http://antireliant.com/bell-siphon/
Bishop, P. (2016, April). The Genius of an Aquaponics Bell Siphon. Retrieved from http://blog.stuppy.com/aquaponics/the-genius-of-a-bell-siphon
Japan Aquaponics. (n.d.). Bell Siphon Guide. Retrieved from http://www.japan-aquaponics.com/bell-siphon-guide.html
Maximum Yield. (n.d.). What is Bell Siphon Aquaponics? - Definition from MaximumYield. Retrieved from https://www.maximumyield.com/definition/3843/bell-siphon-aquaponics
- How to Select the Best Rain Barrel Pump for Your Harvesting System - November 19, 2020
- How to Collect Rainwater on Your Rural Homestead - August 20, 2020
- The 18 Best Water Storage Containers for Emergencies in 2020 - July 26, 2020